Computer Network Projects with Source Code

         Most significantly, our technical experts are providing the complete research support for the research scholars based on the computer network projects along with source code through this article.

  • Routing
  • Cellular standards
  • IEEE 802
  • TCP/IP
  • Asynchronous transfer mode

        The above mentioned are the list of communication protocols in computer network which are about the set of rules to transfer the information through the network. For your ease, we have listed out the sample codes for the computer network projects.

  • IEEE 802 based configuration process
YansWifiPhyHelper wifiPhy = YansWifiPhyHelper::Default ();
wifiPhy.Set ("RxGain", DoubleValue (-30));
wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);
  • TCP/IP based communication process
for( uint32_t i=0;i{Ipv6Address IoTIp = ic.GetLinkLocalAddress (i);
AddressValue IoTAddress (Inet6SocketAddress (IoTIp, VoIP_Port));
OnOffHelper onoff ("ns3::TcpSocketFactory", Address ());
onoff.SetAttribute ("Remote", IoTAddress);
onoff.SetAttribute ("OnTime", StringValue
("ns3::ConstantRandomVariable[Constant=1]"));
onoff.SetAttribute ("OffTime", StringValue ("ns3::ConstantRandomVariable[Constant=0]"));
onoff.SetAttribute ("DataRate", DataRateValue (dataRate));
onoff.SetAttribute ("PacketSize",
UintegerValue (packetSize));
ApplicationContainer IoTApp = onoff.Install (c);
IoTApp.Start (Seconds (1.0));
IoTApp.Stop (Seconds (10.0));}

          In addition, we have executed the computer network project through the utilization of Ns3 using the implementation of the below mentioned commands.

cd /home/research/ns-allinone-3.26/ns-3.26

sudo ./waf –run Main –vis

Simulation Execution

        Finally, we have highlighted the result that is acquired through the implementation of computer network projects.

Simulation Result

        Don’t worry if you people have any doubts!!! Thus, our technical experts are here to provide the appropriate assistance for the research scholars.